Sharepoint 2010 Test Cases
2021年7月1日Download here: http://gg.gg/v72vh
Configure Your SharePoint 2010’s Site Search Settings The search box is just a text box with the prompt Search This Site inside it. Immediately, you can create a custom search results page, define the set of scopes that appear in the drop-down list next to the search box, and determine whether the search drop-down list appears on the page. These white papers describe the performance and capacity impact of specific feature sets included in SharePoint Server 2010. These white papers include information about the performance and capacity characteristics of the feature and how it was tested by Microsoft, including: Test farm characteristics; Test results; Recommendations. Before running any test cases, initialization steps need to be performed: Create Visual Studio load test project and configure your settings; Provision synthetic users on SharePoint farm Create Visual Studio load test project and configure settings. Create new Visual Studio project based on SharePoint Load Test template. Each solution should have its own defined test plan. What follows is an example of a SharePoint test plan. This plan is very basic and is only meant to introduce ideas. To test the new WebPart XYZ for Organization Name based on the Requirements Traceability Matrix provided prior to the inception of this portal project. In this article, you learn about security best-practice recommendations when you are developing solutions by using SharePoint 2010. The recommendations address aspects of cross-site scripting (XSS), cross-site request forgery (CSRF or XSRF), elevation of privilege, denial of service, and information disclosure.
*78% of the Fortune 500 use SharePoint on their Intranet
*1 in 2 corporations uses SharePoint. 22% have all employees using the tool
*Only 25-30% use SharePoint for uses other than collaboration
Are you looking for best SharePoint website designs for some branding inspiration?
Well, here are our selections of 15 best SharePoint website designs. Most of them are built using SharePoint 2013, while few of them use slightly older, SharePoint 2010 version.
But before that, let’s understand:What is SharePoint?
SharePoint is a web-based application in the Microsoft Office server suite that helps you create websites for internal use.
Launched in 2001, originally SharePoint was intended to be sold as a document management and storage system in mid-size businesses and large departments along with other Microsoft Office products such as Skype, Microsoft Exchange, and Office Web Application Server.
Today, Microsoft’s ‘Office 356’ software as a service has led to an increased usage of SharePoint in smaller organizations.What can you do with SharePoint?
*You can create responsive, engaging, informative, and creative websites with SharePoint.
*You can use SharePoint as a secure place to store information – files, documents, web pages, blog articles, etc. – online.
*In addition, SharePoint allows you to organize, share, and access this information using any device.
All you need is a web browser and an Internet connection.
This is what you and your team will see when you create a new site on SharePoint.
SharePoint allows you to organize, share, and access this information using any device
Now that you know what SharePoint is, let’s look at 15 best SharePoint website designs for 2016.
Remember: These sites are hand-picked based on their design, usability, originality, user experience, creativity, custom functionality, and ability to integrate modern design capabilities.
If you have designed any SharePoint website, why not share it with the world? Add it into the comment box below.1. Kuwait Airways
Kuwait Airways is the major (national) airline of Kuwait, with its headquarters in the Kuwait International Airport itself.
Their site, which was built using the responsive SharePoint 2013 platform, offers cheap and competitive flights for air travel to your favorite location.2. Western Australia
Western Australia (also known as “WA”) occupies the entire western 1/3rd of Australia.
It is surrounded by the Indian Ocean to the north and the west, but most of the inhabitants are crowded in the southwest corner.
There are a wide variety of landscapes and climates in Western Australia as well as plenty of the sunshine, which makes it a perfect holiday destination for the tourists.
Here’s another awe-inspiring newly redesigned, modern, engaging, and informative website based in Australia built using SharePoint 2013.3. Stora Enso
Stora Enso is a company that produces book-paper, newsprint, magazine paper, wood products, and industrial packaging.
Store Ensor’s website, built with SharePoint 2013, is highly creative and responsive.
Manana Es Para Siempre by Alejandro Fernandez Chords Different Versions Chords, Tab, Tabs. Chords Diagrams. Guitar Tabs Universe. With Lucero, Fernando Colunga, Sergio Sendel, Silvia Navarro. After the Rebeca (Barbara) catches innocent Eduardo kissing his first love Fernanda, she sends him to a far away land. Years pass and tragedy brings him back, vengeance fills his heart towards the Elizaldo family. And the series unfolds as he developed a secret identity in order to gain his revenge. Choose and determine which version of Manana Es Para Siempre chords and tabs by Alejandro Fernandez you can play. Last updated on. Elenco de manana es para siempre.Create A Test In Sharepoint
Their website uses innovative design techniques like responsive web design layout, responsive slider, slide-out navigation panel, mega drop-down menu, on top of their complex yet delicately designed website design.4. ScreenWest
ScreenWest is a screen funding and development firm, based in Western Australia again, working with other major partners within the screen industry to develop television, media, and digital production in Western Australia.
They recently used SharePoint 2010 to build a completely responsive, engaging, and informative website.5. Saint Thomas HealthSharepoint 2010 Test Cases List
Saint Thomas Health is one of the major faith-based health care systems in Tennessee, United States. It is also a part of Ascension Health, which is considered to be the largest non-profit health care organization in the US.
They recently used SharePoint 2010 to build a captivating responsive web design for their site.6. SegurCaixa Adeslas
Adeslas is one of the leading Health Insurance companies in Spain.
They have used SharePoint 2013 to build yet another awesome responsive website.7. DePaul School of Music
DePaul School of Music is a revolutionary firm in Chicago that offers music lessons to students from professional working musicians in a collaborative way.
Recently, to engage and boost conversions, they built their website using SharePoint 2010.8. Westfalia Fruit
Westfalia Fruit specializes in growing, packing, ripening, marketing, and distributing delicious fruit in the international market.
Recently, they designed their website using SharePoint 2013.9. Mead Johnson Nutrition
Mead Johnson Nutrition produces and distributes more than 70 products in over 50 different countries. Their products are trusted by over million of customers – parents and healthcare professional – who is concerned about the health and well-being of their people.Sharepoint Test Site
Their website is captivating, responsive, engaging, utilizing SharePoint 2007.10. Helse Norge
Helse Norge is a Norwegian based company that offers helpful and useful guides on health and care industry, talking about health, treatments, illness, and rights.
Their newly re-designed website was created using the responsive SharePoint 2013 platform.11. Australian Immigration
Australian immigration is a government department of border protection and immigration in Australia. Recently, they used SharePoint 2010 to build a powerful, modern, and engaging website.12. Joe Martinson
Joe Martinson offers fresh, roasted, and blended coffee to their customers, like no other. Their website is another example of design built with SharePoint 2010.13. PROTO
PROTO, also a division of Stanley Black & Decker, is an industrial hand tool company based in America.
They have headquarters in New Britain and United States (Connecticut).
Their new website is built using SharePoint 2013.14. AAR
AAR (Association of American Railroads) is an organization that represents leading railroads of North America, including Amtrak and other regional commuter railroads.
Their new website design is an example of a beautifully crafted site built with SharePoint 2013.15. Mother Parkers
Mother Parkers are one of the world’s largest suppliers (retailers) of tea and coffee.
Their website was built using SharePoint 2010.
These were the top 15 SharePoint website designs that were hand-picked by our staffs based on their design, creativity, usability, custom functionality, and improved user experience.What about you?
Have you implemented, designed, and managed a SharePoint website for your organization? Please feel free to share it in the comment below.-->
Applies to: SharePoint Foundation 2010
This topic explains how you can define how your custom field is rendered on list views.Overview of Custom Field Rendering on List Views
Microsoft SharePoint Foundation uses XSLT style sheets to render list views. (For a discussion of the system, see Overview of XSLT List View Rendering System.) A list is rendered as an HTML table, and the value of a field is rendered into the appropriate cell of the table by a simple XSLT template from the fldtypes.xsl file located in %ProgramFiles%Common FilesMicrosoft Sharedweb server extensions14TEMPLATELAYOUTSXSL. There are many templates in that file for rendering field values. The template that is used depends on several factors, the most important of which is the type of the field as defined by the SPFieldType enumeration. For example, there is a FieldRef_Number_body template for Number fields and a FieldRef_Text_body template for Text fields.
Note
There is not a one-to-one correspondence of field types to templates. For example, there are several different templates for computed fields, and the FieldRef_Number_body template is used for Currrency() fields in addition to Number fields.
For example, the following is the FieldRef_Text_body template.
The thisNode parameter that is passed to this template consists of dsQueryResponse markup that contains the items from the list (up to the maximum allowed per page). For an example of this markup, see Examples of Input and Result Node Trees in XSLT Transformations.
Notice also that the template branches depending on whether the field is defined to automatically format strings that look like URLs as HTML <a> links. If it is, when the XSLT processor renders the HTML for the field, it does not replace significant characters, such as ’<’ and ’&’, with their character entity equivalents (< and &), which a compliant XSLT processor would ordinarily do by default. Aside from this complication, the template emits the value of the field with the following line.
Because this line appears in virtually all field rendering XSLT templates, it deserves a closer look. The first step of the XPath that identifies the node whose value is to be rendered is simply a reference to the thisNode parameter, so the remainder of the steps are interpreted relative to the root of the markup in that parameter. The next step, before predicates are applied, is /@*. This refers to all attributes of the root and its descendants; therefore in this case, it refers to all the attributes of all the elements in thisNode. The predicated [name()=current()/@Name] further narrows the selection. On the left side of the ’=’ is the XSLT name() function. It represents the name of a node in the sequence produced by the ’$thisNode/@*’ part. In other words, it represents the name of an attribute in some element of thisNode. If you apply this to the example thisNode from Examples of Input and Result Node Trees in XSLT Transformations, you can see that some of the attributes in it are named after the internal names of fields of the list item; for example, Attachments, Title, and the custom field ISBN. The right side of the ’=’ is a reference to the Name attribute of the current node in the source node tree: current()/@Name. Because this template is declared with match =’FieldRef’, it is applied only to FieldRef elements; therefore, the current() function refers to a FieldlRef element. Therefore, the entire xsl:value-of element is saying, ’emit the value of the attribute from thisNode whose name is the same as the name of the current FieldRef in the source node tree.’
So when the Title FieldRef of the example source node tree is being processed, the XSLT processor emits for it the value of the Title attribute of the current Row element in the thisNode markup. (This would be ’Theories of Truth’, for the first row). Similarly, it renders the value of the ISBN attribute of that same Row when it processes the ISBN FieldRef of the source node tree (’0-262-61107-4’).
In most cases, the default rendering that your custom field will get, which is determined primarily by its base type, is just what you want. In the case of Text field, for example, the value is rendered as plain text in the appropriate cell of the HTML table. If you want your custom field to render in a special way, you must use an XSLT style sheet to define how it is rendered. The next section shows how to do this.Defining Custom Rendering for a Custom Field
The following procedure shows how to create a custom XSLT style sheet to render a custom field type.To create a custom XSLT style sheet for field rendering
*
Create a text file with an ’xsl’ extension. It must be named on the pattern fldtypes_*.xsl, where the ’*’ is any string of allowed file name characters. Consider using the name of the custom field, such as fldtypes_ISBN.xsl. If you will have multiple custom XSLT style sheets, consider using your company name, such as fldtypes_Contoso.xsl, and include them all in the same file. Avoid using a string that might be used by another solution provider.
*
Add the following style sheet declaration to the file.
*
Open the file named fldtypes.xsl in %ProgramFiles%Common FilesMicrosoft Sharedweb server extensions14TEMPLATELAYOUTSXSL, and find the template that renders your field by default. If, for example, your field’s base type is Currency, the template is FieldRef_Number_body. Copy the template as a child of your xsl:stylesheet element. The following is an example using the FieldRef_Number_body template.
*
Delete the name attribute from the xsl:template element (in this case name=’FieldRef_Number_body’). Also, delete the ddwrt:dvt_mode attribute if there is one.
*
Change the match attribute, so that the template matches only fields with the exact internal name of your custom field. You do this with an XSLT predicate that specifies the required value of the Name attribute of the FieldRef element. For example, suppose that you have a Net Profit/Loss field whose internal name is ’Net_x0020_Profit_x002f_Loss’: Your template start tag should now look like the following.
This ensures that you are customizing rendering of only your custom field type, not all fields that have Currency or Number as the base type.
*
Edit, and add to, the markup of the template to produce the rendering effect you want. For an example, see the following section.
*
Save and copy the fldtypes_*.xsl file to %ProgramFiles%Common FilesMicrosoft Sharedweb server extensions14TEMPLATELAYOUTSXSL on all the servers.
*
Reset the web application so that the files in %ProgramFiles%Common FilesMicrosoft Sharedweb server extensions14TEMPLATELAYOUTSXSL are reloaded. Your custom file overrides any of the built-in files.Example: Customize Currency Field
Vocaloid voice maker free. As a detailed example of step 6, this section shows how to render the value of the Net Profit/Loss field in red whenever it is a negative number. After step 5, your template should be as follows.
Note first that the default rendering branches depending on the test of the FreeForm parameter. This test returns true if the Type attribute of the Toolbar element in the source node tree is ’FreeForm’. If the attribute value is ’Standard,’ or if the attribute is simply not present, the template adds HTML markup to right-justify the field value within its cell. (See Examples of Input and Result Node Trees in XSLT Transformations for an example of a source node tree and its Toolbar element. See also Toolbar Element (View) for more information.) Because negative values should be red regardless of the toolbar type, you must make markup changes in both branches.Sharepoint Test Site Free
Note also, that the template calls another template, named FieldRef_ValueOf_DisableEscape, to actually render the value. The latter template is also in fldtypes.xsl and is defined as follows.
As shown in the example, this template differs from the standard field rendering template that uses the line <xsl:value-of select=’$thisNode/@*[name()=current()/@Name]’ /> to render the field value—only in that it adds the attribute disable-output-escaping=’yes’, which is explained earlier in this topic.
Roza montazemi art of cooking classes. Within the <xsl:when test=’$FreeForm’> element, add a choose-when-otherwise structure, and move the existing call to the FieldRef_ValueOf_DisableEscape template into the <xsl:otherwise> element as shown in the following example.
The test value should be true whenever the value of the current Net_x0020_Profit_x002f_Loss field is negative; that is, whenever the value is less than zero. You have already seen that $thisNode/@*[name()=current()/@Name] evaluates to the current field. However, currency fields in SharePoint Foundation get a low-level formatting even before any XSLT formatting is applied. Specifically, a negative currency value is expressed with parentheses instead of minus sign. For example, a loss of $497,882.87 is expressed as ($497,882.87) rather than -$497,882.87. This creates a problem because the XSLT processor treats any parenthetical expression as being greater than 0, so you cannot directly compare the value of $thisNode/@*[name()=current()/@Name] with zero. Fortunately, for Currency field types, SharePoint Foundation adds to the markup in the thisNode parameter a second version of the field value as a simple double type value which, when negative, is expressed with a minus sign. Specifically, this version is the value of an attribute of the Row element that has the same name as the Net_x0020_Profit_x002f_Loss attribute, except that a single ’.’ is appended to the end of the attribute name. For example, compare the ’Retail_x0020_Price’ and ’Retail_x0020_Price.’ attributes of the Row element in the example of ’thisNode’ in Examples of Input and Result Node Trees in XSLT Transformations.
Use this attribute with the dot-ended name to test for a negative value. The test
https://diarynote-jp.indered.space
Configure Your SharePoint 2010’s Site Search Settings The search box is just a text box with the prompt Search This Site inside it. Immediately, you can create a custom search results page, define the set of scopes that appear in the drop-down list next to the search box, and determine whether the search drop-down list appears on the page. These white papers describe the performance and capacity impact of specific feature sets included in SharePoint Server 2010. These white papers include information about the performance and capacity characteristics of the feature and how it was tested by Microsoft, including: Test farm characteristics; Test results; Recommendations. Before running any test cases, initialization steps need to be performed: Create Visual Studio load test project and configure your settings; Provision synthetic users on SharePoint farm Create Visual Studio load test project and configure settings. Create new Visual Studio project based on SharePoint Load Test template. Each solution should have its own defined test plan. What follows is an example of a SharePoint test plan. This plan is very basic and is only meant to introduce ideas. To test the new WebPart XYZ for Organization Name based on the Requirements Traceability Matrix provided prior to the inception of this portal project. In this article, you learn about security best-practice recommendations when you are developing solutions by using SharePoint 2010. The recommendations address aspects of cross-site scripting (XSS), cross-site request forgery (CSRF or XSRF), elevation of privilege, denial of service, and information disclosure.
*78% of the Fortune 500 use SharePoint on their Intranet
*1 in 2 corporations uses SharePoint. 22% have all employees using the tool
*Only 25-30% use SharePoint for uses other than collaboration
Are you looking for best SharePoint website designs for some branding inspiration?
Well, here are our selections of 15 best SharePoint website designs. Most of them are built using SharePoint 2013, while few of them use slightly older, SharePoint 2010 version.
But before that, let’s understand:What is SharePoint?
SharePoint is a web-based application in the Microsoft Office server suite that helps you create websites for internal use.
Launched in 2001, originally SharePoint was intended to be sold as a document management and storage system in mid-size businesses and large departments along with other Microsoft Office products such as Skype, Microsoft Exchange, and Office Web Application Server.
Today, Microsoft’s ‘Office 356’ software as a service has led to an increased usage of SharePoint in smaller organizations.What can you do with SharePoint?
*You can create responsive, engaging, informative, and creative websites with SharePoint.
*You can use SharePoint as a secure place to store information – files, documents, web pages, blog articles, etc. – online.
*In addition, SharePoint allows you to organize, share, and access this information using any device.
All you need is a web browser and an Internet connection.
This is what you and your team will see when you create a new site on SharePoint.
SharePoint allows you to organize, share, and access this information using any device
Now that you know what SharePoint is, let’s look at 15 best SharePoint website designs for 2016.
Remember: These sites are hand-picked based on their design, usability, originality, user experience, creativity, custom functionality, and ability to integrate modern design capabilities.
If you have designed any SharePoint website, why not share it with the world? Add it into the comment box below.1. Kuwait Airways
Kuwait Airways is the major (national) airline of Kuwait, with its headquarters in the Kuwait International Airport itself.
Their site, which was built using the responsive SharePoint 2013 platform, offers cheap and competitive flights for air travel to your favorite location.2. Western Australia
Western Australia (also known as “WA”) occupies the entire western 1/3rd of Australia.
It is surrounded by the Indian Ocean to the north and the west, but most of the inhabitants are crowded in the southwest corner.
There are a wide variety of landscapes and climates in Western Australia as well as plenty of the sunshine, which makes it a perfect holiday destination for the tourists.
Here’s another awe-inspiring newly redesigned, modern, engaging, and informative website based in Australia built using SharePoint 2013.3. Stora Enso
Stora Enso is a company that produces book-paper, newsprint, magazine paper, wood products, and industrial packaging.
Store Ensor’s website, built with SharePoint 2013, is highly creative and responsive.
Manana Es Para Siempre by Alejandro Fernandez Chords Different Versions Chords, Tab, Tabs. Chords Diagrams. Guitar Tabs Universe. With Lucero, Fernando Colunga, Sergio Sendel, Silvia Navarro. After the Rebeca (Barbara) catches innocent Eduardo kissing his first love Fernanda, she sends him to a far away land. Years pass and tragedy brings him back, vengeance fills his heart towards the Elizaldo family. And the series unfolds as he developed a secret identity in order to gain his revenge. Choose and determine which version of Manana Es Para Siempre chords and tabs by Alejandro Fernandez you can play. Last updated on. Elenco de manana es para siempre.Create A Test In Sharepoint
Their website uses innovative design techniques like responsive web design layout, responsive slider, slide-out navigation panel, mega drop-down menu, on top of their complex yet delicately designed website design.4. ScreenWest
ScreenWest is a screen funding and development firm, based in Western Australia again, working with other major partners within the screen industry to develop television, media, and digital production in Western Australia.
They recently used SharePoint 2010 to build a completely responsive, engaging, and informative website.5. Saint Thomas HealthSharepoint 2010 Test Cases List
Saint Thomas Health is one of the major faith-based health care systems in Tennessee, United States. It is also a part of Ascension Health, which is considered to be the largest non-profit health care organization in the US.
They recently used SharePoint 2010 to build a captivating responsive web design for their site.6. SegurCaixa Adeslas
Adeslas is one of the leading Health Insurance companies in Spain.
They have used SharePoint 2013 to build yet another awesome responsive website.7. DePaul School of Music
DePaul School of Music is a revolutionary firm in Chicago that offers music lessons to students from professional working musicians in a collaborative way.
Recently, to engage and boost conversions, they built their website using SharePoint 2010.8. Westfalia Fruit
Westfalia Fruit specializes in growing, packing, ripening, marketing, and distributing delicious fruit in the international market.
Recently, they designed their website using SharePoint 2013.9. Mead Johnson Nutrition
Mead Johnson Nutrition produces and distributes more than 70 products in over 50 different countries. Their products are trusted by over million of customers – parents and healthcare professional – who is concerned about the health and well-being of their people.Sharepoint Test Site
Their website is captivating, responsive, engaging, utilizing SharePoint 2007.10. Helse Norge
Helse Norge is a Norwegian based company that offers helpful and useful guides on health and care industry, talking about health, treatments, illness, and rights.
Their newly re-designed website was created using the responsive SharePoint 2013 platform.11. Australian Immigration
Australian immigration is a government department of border protection and immigration in Australia. Recently, they used SharePoint 2010 to build a powerful, modern, and engaging website.12. Joe Martinson
Joe Martinson offers fresh, roasted, and blended coffee to their customers, like no other. Their website is another example of design built with SharePoint 2010.13. PROTO
PROTO, also a division of Stanley Black & Decker, is an industrial hand tool company based in America.
They have headquarters in New Britain and United States (Connecticut).
Their new website is built using SharePoint 2013.14. AAR
AAR (Association of American Railroads) is an organization that represents leading railroads of North America, including Amtrak and other regional commuter railroads.
Their new website design is an example of a beautifully crafted site built with SharePoint 2013.15. Mother Parkers
Mother Parkers are one of the world’s largest suppliers (retailers) of tea and coffee.
Their website was built using SharePoint 2010.
These were the top 15 SharePoint website designs that were hand-picked by our staffs based on their design, creativity, usability, custom functionality, and improved user experience.What about you?
Have you implemented, designed, and managed a SharePoint website for your organization? Please feel free to share it in the comment below.-->
Applies to: SharePoint Foundation 2010
This topic explains how you can define how your custom field is rendered on list views.Overview of Custom Field Rendering on List Views
Microsoft SharePoint Foundation uses XSLT style sheets to render list views. (For a discussion of the system, see Overview of XSLT List View Rendering System.) A list is rendered as an HTML table, and the value of a field is rendered into the appropriate cell of the table by a simple XSLT template from the fldtypes.xsl file located in %ProgramFiles%Common FilesMicrosoft Sharedweb server extensions14TEMPLATELAYOUTSXSL. There are many templates in that file for rendering field values. The template that is used depends on several factors, the most important of which is the type of the field as defined by the SPFieldType enumeration. For example, there is a FieldRef_Number_body template for Number fields and a FieldRef_Text_body template for Text fields.
Note
There is not a one-to-one correspondence of field types to templates. For example, there are several different templates for computed fields, and the FieldRef_Number_body template is used for Currrency() fields in addition to Number fields.
For example, the following is the FieldRef_Text_body template.
The thisNode parameter that is passed to this template consists of dsQueryResponse markup that contains the items from the list (up to the maximum allowed per page). For an example of this markup, see Examples of Input and Result Node Trees in XSLT Transformations.
Notice also that the template branches depending on whether the field is defined to automatically format strings that look like URLs as HTML <a> links. If it is, when the XSLT processor renders the HTML for the field, it does not replace significant characters, such as ’<’ and ’&’, with their character entity equivalents (< and &), which a compliant XSLT processor would ordinarily do by default. Aside from this complication, the template emits the value of the field with the following line.
Because this line appears in virtually all field rendering XSLT templates, it deserves a closer look. The first step of the XPath that identifies the node whose value is to be rendered is simply a reference to the thisNode parameter, so the remainder of the steps are interpreted relative to the root of the markup in that parameter. The next step, before predicates are applied, is /@*. This refers to all attributes of the root and its descendants; therefore in this case, it refers to all the attributes of all the elements in thisNode. The predicated [name()=current()/@Name] further narrows the selection. On the left side of the ’=’ is the XSLT name() function. It represents the name of a node in the sequence produced by the ’$thisNode/@*’ part. In other words, it represents the name of an attribute in some element of thisNode. If you apply this to the example thisNode from Examples of Input and Result Node Trees in XSLT Transformations, you can see that some of the attributes in it are named after the internal names of fields of the list item; for example, Attachments, Title, and the custom field ISBN. The right side of the ’=’ is a reference to the Name attribute of the current node in the source node tree: current()/@Name. Because this template is declared with match =’FieldRef’, it is applied only to FieldRef elements; therefore, the current() function refers to a FieldlRef element. Therefore, the entire xsl:value-of element is saying, ’emit the value of the attribute from thisNode whose name is the same as the name of the current FieldRef in the source node tree.’
So when the Title FieldRef of the example source node tree is being processed, the XSLT processor emits for it the value of the Title attribute of the current Row element in the thisNode markup. (This would be ’Theories of Truth’, for the first row). Similarly, it renders the value of the ISBN attribute of that same Row when it processes the ISBN FieldRef of the source node tree (’0-262-61107-4’).
In most cases, the default rendering that your custom field will get, which is determined primarily by its base type, is just what you want. In the case of Text field, for example, the value is rendered as plain text in the appropriate cell of the HTML table. If you want your custom field to render in a special way, you must use an XSLT style sheet to define how it is rendered. The next section shows how to do this.Defining Custom Rendering for a Custom Field
The following procedure shows how to create a custom XSLT style sheet to render a custom field type.To create a custom XSLT style sheet for field rendering
*
Create a text file with an ’xsl’ extension. It must be named on the pattern fldtypes_*.xsl, where the ’*’ is any string of allowed file name characters. Consider using the name of the custom field, such as fldtypes_ISBN.xsl. If you will have multiple custom XSLT style sheets, consider using your company name, such as fldtypes_Contoso.xsl, and include them all in the same file. Avoid using a string that might be used by another solution provider.
*
Add the following style sheet declaration to the file.
*
Open the file named fldtypes.xsl in %ProgramFiles%Common FilesMicrosoft Sharedweb server extensions14TEMPLATELAYOUTSXSL, and find the template that renders your field by default. If, for example, your field’s base type is Currency, the template is FieldRef_Number_body. Copy the template as a child of your xsl:stylesheet element. The following is an example using the FieldRef_Number_body template.
*
Delete the name attribute from the xsl:template element (in this case name=’FieldRef_Number_body’). Also, delete the ddwrt:dvt_mode attribute if there is one.
*
Change the match attribute, so that the template matches only fields with the exact internal name of your custom field. You do this with an XSLT predicate that specifies the required value of the Name attribute of the FieldRef element. For example, suppose that you have a Net Profit/Loss field whose internal name is ’Net_x0020_Profit_x002f_Loss’: Your template start tag should now look like the following.
This ensures that you are customizing rendering of only your custom field type, not all fields that have Currency or Number as the base type.
*
Edit, and add to, the markup of the template to produce the rendering effect you want. For an example, see the following section.
*
Save and copy the fldtypes_*.xsl file to %ProgramFiles%Common FilesMicrosoft Sharedweb server extensions14TEMPLATELAYOUTSXSL on all the servers.
*
Reset the web application so that the files in %ProgramFiles%Common FilesMicrosoft Sharedweb server extensions14TEMPLATELAYOUTSXSL are reloaded. Your custom file overrides any of the built-in files.Example: Customize Currency Field
Vocaloid voice maker free. As a detailed example of step 6, this section shows how to render the value of the Net Profit/Loss field in red whenever it is a negative number. After step 5, your template should be as follows.
Note first that the default rendering branches depending on the test of the FreeForm parameter. This test returns true if the Type attribute of the Toolbar element in the source node tree is ’FreeForm’. If the attribute value is ’Standard,’ or if the attribute is simply not present, the template adds HTML markup to right-justify the field value within its cell. (See Examples of Input and Result Node Trees in XSLT Transformations for an example of a source node tree and its Toolbar element. See also Toolbar Element (View) for more information.) Because negative values should be red regardless of the toolbar type, you must make markup changes in both branches.Sharepoint Test Site Free
Note also, that the template calls another template, named FieldRef_ValueOf_DisableEscape, to actually render the value. The latter template is also in fldtypes.xsl and is defined as follows.
As shown in the example, this template differs from the standard field rendering template that uses the line <xsl:value-of select=’$thisNode/@*[name()=current()/@Name]’ /> to render the field value—only in that it adds the attribute disable-output-escaping=’yes’, which is explained earlier in this topic.
Roza montazemi art of cooking classes. Within the <xsl:when test=’$FreeForm’> element, add a choose-when-otherwise structure, and move the existing call to the FieldRef_ValueOf_DisableEscape template into the <xsl:otherwise> element as shown in the following example.
The test value should be true whenever the value of the current Net_x0020_Profit_x002f_Loss field is negative; that is, whenever the value is less than zero. You have already seen that $thisNode/@*[name()=current()/@Name] evaluates to the current field. However, currency fields in SharePoint Foundation get a low-level formatting even before any XSLT formatting is applied. Specifically, a negative currency value is expressed with parentheses instead of minus sign. For example, a loss of $497,882.87 is expressed as ($497,882.87) rather than -$497,882.87. This creates a problem because the XSLT processor treats any parenthetical expression as being greater than 0, so you cannot directly compare the value of $thisNode/@*[name()=current()/@Name] with zero. Fortunately, for Currency field types, SharePoint Foundation adds to the markup in the thisNode parameter a second version of the field value as a simple double type value which, when negative, is expressed with a minus sign. Specifically, this version is the value of an attribute of the Row element that has the same name as the Net_x0020_Profit_x002f_Loss attribute, except that a single ’.’ is appended to the end of the attribute name. For example, compare the ’Retail_x0020_Price’ and ’Retail_x0020_Price.’ attributes of the Row element in the example of ’thisNode’ in Examples of Input and Result Node Trees in XSLT Transformations.
Use this attribute with the dot-ended name to test for a negative value. The test
https://diarynote-jp.indered.space
コメント